Knowing
Y
our Mazda
3-14
J Procedur
e to pr
ogram spar
e
SecuriLockT
keys to your
vehicle
New SecuriLockT keys must have the
correct mechanical key cut for your
vehicle.
Conventional (non-SecuriLockT) keys
cannot
be programmed to your vehicle.
You will need to have two previously
programmed
SecuriLock
T
keys and the
new unprogrammed SecuriLockT key
readily accessible for the procedure.
Please read and understand the entire
procedure before you begin.
1. Insert the first previously pro-
grammed SecuriLockT key into the
ignition and turn the ignition from
OFF
to ON (maintain ignition in
ON
for at least one second).
2. Turn
ignition
to OFF and remove the
first SecuriLockT key from the
ignition.
3. Within five seconds of turning the
ignition to OFF, insert the second
previously programmed Securi-
LockT
key
into the ignition and turn
the ignition from OFF to ON (main-
tain ignition in ON for at least one
second but no more than 5 seconds).
To Next Page
Loading...
