Mazda CX-3 2016 - Repair Procedure and Parts; Repair Procedure Steps; Required Parts Information

R064/16
Page 2 of 3
Front
Rear spoiler
Protector
Protector
Protector
Protector
REPAIR PROCEDURE
When you receive a customer complaint on this concern, use the following repair procedure.
1. Remove the rear spoiler according to the procedure in the workshop manual “REAR
SPOILER REMOVAL”.
2. Remove the protectors from the rear spoiler as shown below and clean the relevant area using
the genuine part cleaner.
3. Attach the improved protectors to the rear spoiler as shown above.
4. Install the rear spoiler according to the procedure in the workshop manual “REAR SPOILER
INSTALLATION”.
PARTS INFORMATION
Part Number
Part Name
Q’ty
Remark
D1YB-51-954
PROTECTOR
1
One set contains four improved
protectors.
D651-68-162A
CLIP, TRIM
1
-
EG21-51-SJ3
CLIP
2
CLIP contains a packing. (Packing is
NOT reusable part.)
Improved
protector
Old
protector
2mm
3.5 mm