Indication on display
NOTE
•
If the LDWS warning sound is set to
rumble
*1
, the sound will be heard from
the vehicle speaker on the side which the
system determined the vehicle may be
deviating from its lane.
•
It may be difficult to hear the LDWS
warning beep depending on the
surrounding conditions such as outside
noise.
•
The volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-10.
•
The type of warning sound (rumble
*1
/
beep) on the LDWS can be changed.
Refer to Personalization Features on
page 9-10.
*
1 A rumble strip is a series of grooves in
the road pavement surface positioned
at specific intervals, and when the
vehicle passes over it a vibration and
rumble sound is produced which alerts
the driver that the vehicle is departing
from the lane.
The rumble sound is a reproduction of
the sound which occurs when a vehicle
passes over a rumble strip.
Rumble
Groove
When Driving
i-ACTIVSENSE
4-77
CX-3_8GA5-EA-17F_Edition1 2017-4-7 15:30:54
To Next Page
