▼
Setting the System
OFF/CAN switch
RES switch
switch
switch
MODE switch
SET- switch
SET+ switch
When the MODE switch is pressed, the MRCC main indication (white) turns on and the
vehicle speed and the distance between vehicles while in headway control can be set.
NOTE
•
When the ignition is switched to ACC or OFF while the MRCC is ON, the MRCC remains
ON automatically.
•
When the MODE switch is pressed while the MRCC system is turned on, the system
switches to the cruise control function.
How to Set the Speed
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET
or SET switch is pressed. The set speed and
the inter-vehicle distance display filled with white lines are displayed. The MRCC set
indication (green) is indicated simultaneously.
Travel status Display
During travel at constant speed
During travel under headway control
When Driving
i-ACTIVSENSE
4-98
CX-3_8GA5-EA-17F_Edition1 2017-4-7 15:30:54
To Next Page
