DTC C1031:35 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2906600.html[1/7/13 9:29:56 AM]
Is the TPMS set switch normal?
SWITCH REMOVAL/INSTALLATION.)
3
VERIFY THAT THE SAME DTC IS NOT PRESENT
Reconnect all disconnected
connectors.
Clear the DTCs from the memory.
(See
ON-BOARD DIAGNOSIS
[DYNAMIC STABILITY CONTROL
(DSC)]
.)
Are the same DTCs present?
Yes Repeat the inspection from Step 1.
No Go to the next step.
4
VERIFY THAT NO OTHER DTCS ARE PRESENT
Are any other DTCs output?
Yes Go to the applicable DTC inspection.
(See
ON-BOARD DIAGNOSIS [DYNAMIC
STABILITY CONTROL (DSC)]
.)
No DTC troubleshooting completed.
< Previous Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.
To Next Page
