SYMPTOM TROUBLESHOOTING [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0403b2804200.html[1/7/13 9:31:28 AM]
Hill launch assist (HLA) does not operate on a slope
X: Applied
Troubleshooting item
1 2 3 4 5 6 7 8
DSC HU/CM does not operate X X X
Communication error between DSC HU/CM and
instrument cluster
X X X
DSC HU/CM internal malfunction X X X
Instrument cluster malfunction X X X
Brake fluid amount is low X
DSC HU/CM detected malfunction (input and
output device malfunction)
X X X X X
DSC HU/CM detects low voltage in power
supply
X X
To Next Page
