Identifier
Check the following
identifiers
and connect the charge lead.
Supply
type
Standard
Configura-
tion
Type of ac-
cessory
Voltage
range
Identifier
*1
AC
EN
62196-2
TYPE 2
Vehicle
connector
and vehicle
inlet
≤ 480 V
RMS
AC
EN
62196-2
TYPE 2
Plug
Socket out-
let
≤ 480 V
RMS
DC
EN
62196-3
FF
Vehicle
connector
and vehicle
inlet
50 V to 500
V
*
1 Some charge leads may not have an identifier.
Battery heater
The battery heater is designed to maintain the appropriate high voltage battery
temperature.
Because the driving performance and the charging performance decrease if the high
voltage battery temperature decreases, decreases in their performance are reduced
by maintaining the appropriate high voltage battery temperature using the battery
heater.
When the high voltage battery temperature decreases significantly while parking or
charging, the battery heater operates. When the temperature increases to the
specified value, the heater turns o.
Before Driving
Electric Vehicles
3-18
To Next Page
Loading...
