▼
Transmitter
1. Operation indicator light
2. Lock button (
)
3. Unlock button (
)
4. Intrusion sensor cancel button (
)
*
NOTE
x
The headlights turn
on/o
by
operating the transmitter. Refer to
Leaving Home Light on page 4-41.
x
(With theft-deterrent system)
The hazard warning lights flash when
the theft-deterrent system is armed
or turned o.
Refer to Theft-Deterrent System on
page 3-64.
x
(With the advanced keyless
function)
The setting can be changed so that a
beep sound is heard for
confirmation
when the doors, liftgate, and charge
lid are locked/unlocked using the
key.
The volume of the beep sound can
also be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
The operation indicator light flashes
when the buttons are pressed.
Lock button
To lock the doors, liftgate, and charge
lid, press the lock button and the
hazard warning lights will flash once.
NOTE
x
When any door or the liftgate is open
and the lock button is pressed, the
closed doors can be locked. After
that, any other open door or the
liftgate can be locked by closing
them.
x
Make sure all the doors, liftgate, and
charge lid are locked after pressing
the button.
x
(With double locking system)
Pressing the lock button twice within
3 seconds will activate the double
locking system.
Refer to Double Locking System on
page 3-40.
x
(With theft-deterrent system)
If the lock button is pressed with all
the doors and liftgate closed, the
hazard warning lights will flash and
the theft-deterrent system is armed.
Unlock button
To unlock the doors, liftgate, and
charge lid, press the unlock button and
the hazard warning lights will flash
twice.
Before Driving
Keys
*Some models.
3-33
To Next Page
Loading...
