Mirrors
▼
Mirrors
Before driving, adjust the inside and
outside mirrors.
▼
Outside Mirrors
WARNING
Be sure to look over your shoulder
before changing lanes:
Changing lanes without taking into
account the actual distance of the
vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it appears.
NOTE
(Driver's Side Wide Angle Mirror)
x
The wide angle mirror has 2
curvatures on its surface separated by
a region line into outer and inner
regions. The inner region is a
standard convex mirror whereas the
outer region allows for a wider range
of visibility within the same sweep.
This combination allows for better
assurance when making lane
changes.
1. Region line
x
The perceived distance of objects in
the outer and inner regions of the
wide angle mirror is dierent.
Objects appearing in the outer
region are actually further away than
they are in the inner region.
Power mirror adjustment
The power switch must be switched to
ACC or ON position.
To adjust:
1. Press the select switch for the
outside mirror to be adjusted to
turn on the indicator light.
2. Press the adjustment switch to
adjust the angle of the outside
mirror.
1. Indicator light
2. Select switch
3. Adjustment switch
After adjusting the angle of the outside
mirror, press the select switch for the
outside mirror to be adjusted to turn
o the indicator light.
Before Driving
Mirrors
3-51
To Next Page
Loading...
