Mazda MX-30 2020 - Page 160

To cancel the intrusion sensor, press
the intrusion sensor cancel button on
the transmitter within 20 seconds after
pressing the lock button.
The hazard warning lights will flash 3
times.
NOTE
x
To reactivate the intrusion sensor,
turn
o
the armed theft-deterrent
system and then rearm it.
x
The intrusion sensor is operational
when the theft-deterrent system is
armed. To cancel the intrusion
sensor, press the intrusion sensor
cancel button each time the
theft-deterrent system is armed.
▼
To Turn O an Armed System
An armed system can be turned o
using any one of the following
methods:
x
Pressing the unlock button on the
transmitter.
x
Starting the EV system with the
power switch.
x
(With the advanced keyless
function)
x
Touching the sensing area of the
door release touch sensor.
The hazard warning lights will flash
twice.
NOTE
When the doors are unlocked by
pressing the unlock button on the
transmitter while the theft-deterrent
system is turned o, the hazard
warning lights will
flash
twice to
indicate that the system is turned o.
▼
To Stop the Alarm
A triggered alarm can be turned o
using any one of the following
methods:
x
Pressing the unlock button on the
transmitter.
x
Starting the EV system with the
power switch.
x
(With the advanced keyless
function)
x
Touching the sensing area of the
door release touch sensor.
x
Pressing the electric liftgate opener
while the key is being carried.
The hazard warning lights will flash
twice.
Before Driving
Security System
3-67