▼
Windscreen Defroster Switch
Press the switch to defrost the
windscreen and front door windows.
NOTE
The defroster can also be used by
touching the
.
▼
Mode Selector Icon
When the , , , , or is
touched, the airflow mode can be
selected according to the purpose of
use.
NOTE
x
When on the auto operation screen,
touch the seat indication in the
centre of the screen to display the
, , , , and icons.
x
When
flicking
the , , , ,
or
to the left, the icon two icons
to the left can be selected. When
flicking
to the right, the icon two
icons to the right can be selected.
Basic Air-Conditioning
System Operation
▼
Air Conditioner Basic Operation
Operate the air conditioner (cooling,
defrosting functions) with the EV
system started. The air conditioner can
be used while charging when the
power switch is switched ON. In
addition, Cabin preconditioning can
also be used when the power switch is
switched OFF.
NOTE
When the charging is completed with
the power switch switched ON, the air
conditioner (cooling, heating,
defrosting functions) stops
automatically.
1. Press the AUTO switch. Selection of
the airflow mode, air intake
selector and amount of airflow will
be automatically controlled.
2. Operate the temperature setting
switch/
(red) or (blue) to
set the desired temperature.
NOTE
x
The recommended set
temperature is 22 °C (72 °F).
x
Setting the temperature to
maximum hot or cold will not
provide the desired temperature
at a faster rate.
x
The power consumption of the
air conditioner changes
depending on the set
temperature and the ambient
temperature. If the set
temperature is too low or high,
the remaining distance to full
discharge shortens.
3. To turn o the system, press the
air-conditioning power switch.
Interior Features
Air-Conditioning System
5-7
To Next Page
Loading...
