The following conditions indicate that
the battery power is low:
x
A message, “Low Key Fob Battery.
Replace Battery” is displayed on the
multi-information display when the
power switch is switched OFF.
x
The system does not operate and the
operation indicator light on the
transmitter does not flash when the
buttons are pressed.
x
The system's operational range is
reduced.
Incorrect battery replacement
operation may damage the key.
Replacing the battery at an expert
repairer (we recommend an
Authorised Mazda Repairer) is
recommended. If replacing the battery
by yourself, follow the instruction.
Replacing the key battery
1. Remove the lower cover while
pressing the knob in the direction
of the arrow.
2. Press in the tab to unlock the upper
cover.
3. Insert a tape-wrapped flathead
screwdriver into the gap and slide it
in the direction of the arrow.
4. Twist the flathead screwdriver in the
direction of the arrow and remove
the upper cover.
5. Remove the cap using the
tape-wrapped flathead screwdriver.
Maintenance and Care
Owner Maintenance
6-25
To Next Page
Loading...
