3. When the connection is established with the call centre, the indicator light
(green) flashes somewhat quickly (0.3 second intervals) and the transmission of
the vehicle information begins.
4. When the transmission of the vehicle information is completed or about 20
seconds have elapsed since the transmission began, the beep sounds and the
voice call with the call centre starts.
5. If the connection fails, the indicator light (red) turns on and the indicator light
(green) flashes quickly (0.15 second intervals) and the beep sounds
simultaneously.
In this case, make a manual connection using the Emergency call switch because
an automatic connection is not possible.
1. Red (Turns on)
2. Green (Flashes)
Manual emergency calls
With the power switch switched ON, long-press the Emergency call switch and after
releasing your finger from the switch, the vehicle information is automatically
transmitted to the call centre.
When the transmission of the vehicle information is completed or about 20 seconds
have elapsed since the transmission began, the voice call with the call centre starts.
NOTE
x
Only make calls manually for conditions requiring urgent treatment such as illness
or serious injury.
x
When making emergency calls manually, stop the vehicle in a safe location before
making the call.
x
The call centre will end an emergency call. The user cannot end the emergency
call.
x
If a call is disconnected or a call cannot be made to the call centre correctly, an
automatic call is made again to the call centre.
If Trouble Arises
Emergency Call System
7-9
To Next Page
Loading...
