6. If the connection fails, the indicator light (red) turns on and the indicator light
(green) flashes quickly (0.15 second intervals), and the beep sounds
simultaneously.
Make a manual emergency call again.
1. Red (Turns on)
2. Green (Flashes)
NOTE
If a call to the call centre does not connect even though the indicator light shows a
call is possible, make a call to the police or other authority by means other than the
Emergency call system.
▼
Indicator Light/Beep Sound
The indicator light turns on/flashes and beep sounds are activated to notify the
driver of the system operation status or if there is a problem with the system.
Status
Indicator light
Beep sound
status
On/flashing conditions
Green Red Flash interval
Diagnosis Turns on Turns on ʊʊ
When the power switch is
switched ON, it turns on and
then turns o after a few sec-
onds.
NOTE
A manual emergency call is
not possible during diagnosis.
Normal Turns o Turns o ʊʊ
The system is operating nor-
mally.
If Trouble Arises
Emergency Call System
7-11
To Next Page
Loading...
