Rear
CAUTION
Do not use excessive force as it may
damage the cap or scratch the
painted bumper surface.
NOTE
Remove the cap completely and
store it so as not to lose it.
3. Securely install the towing eyelet
using the jack lever or equivalent.
Consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
Front
1. Jack lever
2. Towing eyelet
Rear
1. Jack lever
2. Towing eyelet
4. Hook the towing rope to the
towing eyelet.
CAUTION
¾If the towing eyelet is not securely
tightened, it may loosen or
disengage from the bumper when
towing the vehicle. Make sure
that the towing eyelet is securely
tightened to the bumper.
¾Be careful not to damage the
towing eyelet and towing hook or
vehicle body when towing under
the following conditions:
¾Do not attach any rope other
than to the towing eyelet and
towing hook.
If Trouble Arises
Emergency Towing
7-31
To Next Page
Loading...
