Display
*1*2
Content Action to be taken
Cruising &
Trac
Sup-
port Operation Cancel-
led. Drive Safely
This message is indicated when the
Cruising & Trac Support (CTS) have
been cancelled other than by the
driver.
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Distance & Speed Alert
Operation Cancelled
Drive Safely
This message is indicated when the
Distance & Speed Alert (DSA) have
been cancelled other than by the
driver.
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Cruise Control Opera-
tion Cancelled. Drive
Safely
This message is indicated when the
Cruise Control have been cancelled
other than by the driver.
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Emergency Braking Acti-
vated. Depress Brake
Pedal to Hold Stop
This message is indicated after the
Smart Brake Support (SBS) brakes op-
erate and when the SBS is cancelled.
Depress the brake pedal.
Touch Key Fob to Push
Button Start Switch
This message is indicated when the
key battery is weak (battery dead or
damaged key).
Touch the key against power switch
to start the EV system.
Refer to Starting the EV System When
the Key Battery is Dead on page 4-7.
Depress Brake Pedal to
Start Vehicle
This message is displayed when the
power switch is pressed without de-
pressing the brake pedal.
To start the EV system, press the pow-
er switch with the brake pedal de-
pressed.
Press Push Button Start
Switch While Turning
Steering Wheel Left or
Right
This message is indicated while the
steering wheel is locked.
Release the steering wheel lock by
pressing the start button while turn-
ing the steering wheel to the left and
right.
Check Shift Selector Lev-
er Position
Displays in the following cases:
x
Selector lever is shifted to R posi-
tion while driving forward.
x
Selector lever is shifted to P posi-
tion while driving.
x
Selector lever is shifted to D posi-
tion while reversing.
Check the selector lever position.
Close Door and Fasten
Seat Belt
This message is indicated when the
AUTOHOLD switch is pressed with
the driver’s seat belt unfastened or
the driver’s door open.
Fasten the driver's seat belt and press
the AUTOHOLD switch with the driv-
er’s door closed.
Wiper Blades Must Be
on Windscreen Before
Operating
This message is indicated when the
power switch is switched ON with
the wiper arms at the service posi-
tions.
Return the wiper arms to the initial
positions.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-46
To Next Page
Loading...
