If the amount of washer
uid
spray is
insucient, do not use the washer
switch. If the washer switch continues to
be operated with no washer uid being
sprayed, it could lead to pump damage.
NOTE
If the windshield wipers are operated
under cold weather conditions or during
snowfall, they could stop due to
accumulated snow on the windshield. If
the windshield wipers stop due to
accumulated snow on the windshield, park
the vehicle in a safe place, turn the wiper
switch off, and then remove the
accumulated snow. If the wiper switch is
turned to another position other than OFF,
the wipers will operate. If the wipers do
not operate even though the wiper switch
is turned to a position other than OFF,
consult an Authorized Mazda Dealer as
soon as possible.
▼
Windshield Wipers
Turn the wipers on by pressing the lever
up or down.
With intermittent wiper
Switch Posi‐
tion
Wiper operation
MIST Operation while pulling up lever
Switch Posi‐
tion
Wiper operation
OFF Stop
INT Intermittent
LO Low speed
HI High speed
Variable-speed intermittent wipers
Set the lever to the intermittent position
and choose the interval timing by rotating
the ring.
INT ring
Fast
Slow
With auto-wiper control
Switch Posi‐
tion
Wiper operation
MIST Operation while pulling up lever
OFF Stop
AUTO Auto control
LO Low speed
HI High speed
When Driving
Switches and Controls
4-53
MX-5_8KH8-EA-21K_Edition1_old 2021-9-1 11:05:15