Black plate (311,1)
4. Unload passengers and luggag e, and
remove the emergency flat tire repair
kit.
5. Shake the tire sealant well.
CAUTION
If the bottle is shaken after the
injection hose is screwed on, tire
sealant could spray out from the
injection hose. Tire sealant
contacting clothing or other objects
may be impossible to remove. Shake
the bottle before screwi ng on the
injection hose.
NOTE
The tire sealant can be used at outside
temperatures down to
_
30°C (
_
22°F).
In extremely cold temperatures (0°C (32°F) or
below), the tire sealant hardens easily and
injection of the sealant will be difficult. Warm
the sealant inside the vehicle before doing the
injection work.
6. Remove the cap from the bottle. Screw
on the injection hose with the bottle's
inner cap left on to break the inner cap.
Injection hose
Bottle
7. Remove the valve cap from the flat
tire. Press the back of a valve core tool
to the core of the tire valve and bleed
all the remaining air.
Valve core tool
Valve
Valve cap
In Case of an Emergency
Flat Tire
7-7
RX-8_8BQ7-EA-10H_Edition1 Page311
Wednesday, July 14 2010 11:52 AM
Form No.8B
To Next Page
Loading...
