EasyManua.ls Logo

Mazda RX8 - Page 57

Mazda RX8
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• External fuel shut off or
accessory (such as kill
switch, alarm.)
• Fuel quality (e.g. proper
octane, contamination,
winter/summer blend)
• No air leakage from intake-
air system
• Air cleaner element
(restriction, improper
installation)
• Blockage at intake-air
system (between MAF
sensor and intake ports)
• MAF sensor installation
• Ignition wiring
• Electrical connections
• Fuses
• Smooth operation of
throttle valve
Are all the items normal?
No
Service if necessary.
Repeat Step 2.
Yes
DTC is displayed:
Go to the applicable DTC inspection.
(See DTC TABLE .)
3
Connect the WDS or equivalent to
the DLC-2.
Turn the ignition switch to the ON
position (Engine off).
Retrieve any DTCs.
Are there any DTCs displayed?
No
No DTC is displayed:
Go to the next step.
Yes
Go to the symptom troubleshooting "No.17
Cooling system concerns - Overheating".
(See NO.17 COOLING SYSTEM
CONCERNS-OVERHEATING .)
4 Is the engine overheating?
No Go to the next step.
5 Yes Go to the next step.
(w) RX8-Engine Troubleshooting
Page 57

Table of Contents