Connect the WDS or equivalent
to the DLC-2.
Access APP1, APP2, TP_REL,
MAF and VSS PIDs.
Monitor each PID while driving
vehicle.
(See PCM INSPECTION .)
Are the PIDs normal?
No
If the APP1, APP2 PIDs are not as
specified: Inspect the APP sensor.
(See ACCELERATOR PEDAL POSITION
(APP) SENSOR INSPECTION .)
If the TP_REL PID is not as specified:
Inspect the TP sensor.
(See THROTTLE POSITION (TP)
SENSOR INSPECTION .)
If the MAF PID is not as specified: Inspect
the MAF sensor.
(See MASS AIR FLOW (MAF) SENSOR
INSPECTION .)
If the VSS PID is not as specified: Inspect
the ABS or DSC system.
(See DTC Table .)
(See DTC Table .)
9 Yes Go to the next step.
(w) RX8-Engine Troubleshooting
Page 73
To Next Page
