No
Replace the fuel pump unit.
(See FUEL PUMP UNIT
REMOVAL/INSTALLATION .)
After that overhaul or replace the
engine.
(See ROAD TEST .)
Does the torque converter clutch
control operate properly?
Yes
Inspect for the following:
• Blockage at intake-air system
(between MAF sensor and intake
ports)
• MAF sensor installation
No
Repair or replace the
malfunctioning parts, according to
the torque converter clutch control
inspection results.
20
• Verify test results.
! If normal, return to the diagnostic index to service any additional symptoms.
! If the malfunction remains, inspect the related Service Bulletins and/or the
On-line Repair Information and perform the repair or diagnosis.
(w) RX8-Engine Troubleshooting
Page 76