Mazda RX8 - Page 100

6. Install in the reverse order of removal.
POWER WINDOW SUBSWITCH INSPECTION
1. Verify continuity as indicated in the table.
• If not as indicated in the table, replace the power window subswitch.
2. Connect battery positive voltage to terminal E and ground to the terminal A. Verify that continuity
exists.
• If not as specified, replace the power window subswitch.
3. Connect battery positive voltage to terminal E and ground to the terminal B. Verify that continuity
exists.
• If not as specified, replace the power window subswitch.
(w) RX-8 Body
Page 100