Mazda RX8 - Page 192

FRONT FOG LIGHT
FRONT FOG LIGHT REMOVAL/INSTALLATION
LH
1. Disconnect the negative battery cable.
2. Remove the front side marker lights.(See FRONT SIDE MARKER LIGHT
REMOVAL/INSTALLATION .)
3. Remove the front bumper.(See FRONT BUMPER REMOVAL/INSTALLATION .)
4. Disconnect the connector.
5. Remove the screws, then remove the front fog light.
6. Install in the reverse order of removal.
7. Adjust the front fog light aiming.(See FRONT FOG LIGHT AIMING .)
RH
1. Disconnect the negative battery cable.
(w) RX-8 Body
Page 192