COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
CAUTION:
• For vehicles with DSC: If the disc on the combination switch is deformed or has foreign material
adhering to it, performance of the steering angle sensor may be reduced, causing abnormal operation.
When handling the combination switch, be careful not to deform the disc and make sure there is no
foreign material on it.
1. Disassemble in the order indicated in the table.
1 Screw
2 Wiper and washer switch
3 Light switch
4 Body
2. Assemble in the reverse order of disassembly.
To Next Page
Loading...
