DTC 07:ER02
DTC 07:Er02 MD player
DETECTION
CONDITION
NOTE:
• When error occurs, error message "CHECK MD" is displayed in the
LCD.
• Cannot play MD normally or change tracks.
POSSIBLE CAUSE
• Defective MD (scratches or dirt)
• MD player malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to Step 3.
Cannot change
to specific
tracks.
Go to the next step.
1
Play the MD and
change tracks.
Can tracks be changed?
No
Cannot change
to any track.
Change the MD and try to change tracks again.
• If the function is normal, go to Step 3.
• If the function is not normal, replace the MD
player. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
Yes Go to the next step.
2
Verify the condition of
the MD when the error
occurs.
Is the MD normal?
No
Repair (remove foreign material, clean) or replace the MD, and go to the
next step.
Yes
Replace the MD player. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Play the MD and
change tracks.
Is DTC 07: Er02
displayed?
No DTC troubleshooting completed.