DTC 07:ER01
DTC 07:Er01 MD player
DETECTION CONDITION
• MD player cannot implement insert and eject commands.
POSSIBLE CAUSE
• Defective MD (broken or foreign material stuck/attached)
• MD player malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to the next step.
1 Can MD be ejected?
No Replace the MD player.
Yes Go to the next step.
2
Verify the condition of the MD
when the error occurs.
Is the MD normal?
No
Repair (remove foreign material) or replace the MD, and go
to the next step.
Yes
Replace the MD player. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Insert then eject a normal MD.
Is DTC 07: Er01 displayed?
No DTC troubleshooting completed.