DTC 06:ER07
DTC 06:Er07 CD changer (upper module)
DETECTION
CONDITION
NOTE:
• When error occurs, error message "CHECK CD" is displayed in the
LCD.
• Base unit detects CD reading error.
POSSIBLE CAUSE
• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to Step 3.
Cannot read specific CDs. Go to the next step.
1
Play all the CDs in the changer.
Are they read normally?
No
Cannot read any CD. Go to Step 3.
Yes Go to the next step.
2
Verify the condition of the CD
when the error occurs.
Is the CD normal?
No
Repair (remove foreign material, clean) or replace the CD, and
go to the next step.
Yes
Replace the CD changer (upper module). (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC, and then insert a
normal CD.
Play the CD for 12 s or more .
Is DTC 06: Er07 displayed?
No DTC troubleshooting completed.
To Next Page
Loading...
