Mazda RX8 - Page 295

DTC 06:ER02
DTC 06:Er02 CD changer (upper module)
DETECTION
CONDITION
NOTE:
• When error occurs, error message "CHECK CD" is displayed in the
LCD.
• Cannot play CD normally or change tracks.
POSSIBLE CAUSE
• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to Step 3.
Cannot
change to
specific tracks.
Go to the next step.
1
Play all the CDs in
the changer and
change tracks.
Can tracks be
changed?
No
Cannot
change to any
track.
Change the CD and try to change tracks again.
• If the function is normal, go to Step 3.
• If the function is not normal, replace the CD
changer (upper module). (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
Yes Go to the next step.
2
Verify the condition
of the CD when the
error occurs.
Is the CD normal?
No
Repair (remove foreign material, clean) or replace the CD, and go to the
next step.
Yes
Replace the CD changer (upper module). (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Play the CD and
change tracks.
Is DTC 06: Er02
displayed?
No DTC troubleshooting completed.
(w) RX-8 Body
Page 295