Mazda RX8 - Page 294

DTC 06:ER01
DTC 06:Er01 CD changer (upper module)
DETECTION
CONDITION
• CD changer (upper module) cannot implement insert, eject, and disc
change commands.
POSSIBLE CAUSE
• Defective CD (broken or foreign material stuck/attached)
• CD changer (upper module) malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to the next step.
1 Can CD be ejected?
No Replace the CD changer (upper module).
Yes Go to the next step.
2
Verify the condition of the CD
when the error occurs.
Is the CD normal?
No
Repair (remove foreign material) or replace the CD, and go to
the next step.
Yes
Replace the CD changer (upper module). (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Insert then eject a normal CD.
Is DTC 06: Er01 displayed?
No DTC troubleshooting completed.
(w) RX-8 Body
Page 294