• Warning and indicator light • Warning and indicator light
28 Oil pressure gauge Oil pressure gauge
31 Key reminder switch Key reminder warning alarm
55 Dimmer switch (panel light control switch) Panel light control
NOTE:
• Check codes which are not listed may be indicated, but they cannot be inspected.
• The check codes are displayed in numerical order.(While performing the inspection, if you want to
inspect a check code with a number smaller than the code number you are currently inspecting,
terminate the check mode then repeat the inspection from the beginning.)
• If a speed signal is input to the instrument cluster (the wheels are rotated) while a code other than check
code 50 or 51 is displayed, the input/output check mode will be cancelled.
• The check codes can be fast-forwarded by pushing and holding the odometer/tripmeter switch for 1 s or
more .
To Next Page
Loading...
