Mazda RX8 - Page 7

STAY DAMPER DISPOSAL
NOTE:
• The gas in the stay damper is colorless, odorless, and non-toxic.
1. Wear protective eye wear.
2. Lay the stay damper flat.
3. Saw 2

3 mm {0.08

0.11 in} into the stay damper using a hacksaw, and allow the gas to escape from
the stay damper.
4. Verify that the gas has escaped from the stay damper.
5. Discard the stay damper.
(w) RX-8 Body
Page 7
Notes: