Need help?Do you have a question about the MB Connect Line mbNET MDH 830 and is the answer not in the manual?
Guides on connecting equipotential bonding and the 10-30V DC power supply to the X1 terminal.
Explains the system check after power-on, detailing the sequence of Pwr, Err, and Rdy LED indications.
Steps to create a new device entry in mbCONNECT24, including essential information like name and type.
Details configuring network settings (IP, Netmask) and internet connection parameters within mbCONNECT24.
Instructions to save the configuration file (mbconnect24.mbn) to a USB stick for transfer.
Guides USB insertion and observing LED indications (Fc1, Fc2, Fc3) during configuration transfer for V2.x.
Explains settings copying and device reboot after Dial Out release, with LED Con indicating login status.
Instructions for logging into mbCONNECT24 for version 2.x using the mbDIALUP client software.
Steps to create a new project in mbCONNECT24 Administration, assigning a project name.
Guide on creating a new device in a project, specifying device type and a unique name for the mbNET.
Focuses on configuring device interfaces (System, LAN) as part of initial setup in mbCONNECT24.
General| Manufacturer | MB Connect Line |
|---|---|
| Model | mbNET MDH 830 |
| Cellular | 4G LTE |
| Ethernet Ports | 4 |
| WAN Ports | 1 |
| LAN Ports | 3 |
| USB Ports | 1 x USB 2.0 |
| Operating Temperature | -20°C to 60°C |
| Product Type | Network Router |
| Connectivity | Ethernet |
| SIM card slot | Yes |
To Next Page
