MB QUART QUBOne - Bluetooth Connection

BLUETOOTH CONNECTION
When the speaker is turned on, you should hear a voice prompt and the blue pairing LED
onthesideofthedevicewillashquicklyindicatingthatpairingmodeisactivatedandit
issearchingforaBluetoothsource.TheblueLEDwillashslowlywhenitisattemptingto
connect to the device it was paired to last.
Go to the Bluetooth menu of your source device and connect to QUBOne from the list of
devices. If asked for a code, enter 0000.
Oncetheconnectionisachieved,thepairingLEDwillstopashingandthespeakerwill
emit two short beeps.
You are now connected and can play from your source.
6