Need help?Do you have a question about the MBL 9008 A and is the answer not in the manual?
General| Type | Mono power amplifier |
|---|---|
| Output | Speaker binding posts |
| Inputs | 1 x XLR |
| Input impedance | 20 kOhm |
| Signal-to-noise ratio | 108 dB |
| THD+N | <0.001% |
| Total Harmonic Distortion | < 0.008% |
| Power Supply | 50-60 Hz |
Instructions for connecting speakers in stereo mode, including single and bi-wiring methods.
Instructions for connecting speakers in mono mode, covering single and bi-wiring configurations.
Instructions for setting up stereo bi-amping with two power amplifiers for speakers.
Instructions for setting up mono bi-amping with four power amplifiers for speakers.
Steps to diagnose and resolve issues where the amplifier does not power on or indicator lights are off.
Steps to resolve problems resulting in no sound from the speakers.
Guidance for addressing problems related to sound distortion or incorrect audio reproduction.
To Next Page
