Need help?Do you have a question about the MBL Corona Line and is the answer not in the manual?
Details safety precautions, operating conditions, and critical warnings for equipment use.
Product conformity with EMC and low-voltage directives.
Information on warranty validity and required registration.
Lists items included in the MBL Corona Line device packaging.
Lists necessary cables for connecting the Corona Line system components.
Instructions for powering the device on and off safely, including important notices.
Enables interconnected component operation and synchronized functions via SmartLink cable.
How to adjust display brightness and use the common dimming function.
Managing system standby and individual device power states via the standby button.
Explanation of context-sensitive 'softkey' buttons and their functions displayed on screen.
Guidance on updating device software using a standard SD card interface.
Using menu controls, setting up inputs, and mapping channels.
Customizing input names and setting maximum volume limits upon startup.
Adjusting standby ring brightness and viewing device information like firmware version.
Procedure to reset the device to its original factory default settings.
Overview of remote control layout and button assignments for system operation.
Identification of front and rear panel connections and controls for the CD player.
Identification of front and rear panel connections and controls for the preamplifier.
Identification of front and rear panel connections and controls for the integrated amplifier.
Identification of front and rear panel connections and controls for the stereo power amplifier.
Identification of front and rear panel connections and controls for the mono power amplifier.
Connecting a CD player with an integrated amplifier using RCA cables.
Establishing SmartLink communication between CD player and integrated amplifier.
Connecting loudspeakers to the integrated amplifier's terminals.
Connecting the power supply cable to the integrated amplifier.
Connecting the CD player to the preamplifier using RCA or XLR cables.
Connecting the preamplifier outputs to stereo power amplifier inputs.
Linking CD player, preamplifier, and stereo power amplifier via SmartLink.
Connecting loudspeakers to the stereo power amplifier's terminals.
Connecting the power supply cable to the stereo power amplifier.
Connecting the CD player to the preamplifier using RCA cables.
Connecting the preamplifier outputs to mono power amplifier inputs using XLR cables.
Linking CD player, preamplifier, and mono power amplifiers via SmartLink.
Connecting loudspeakers to mono power amplifier terminals.
Connecting the power supply cable to the mono power amplifiers.
Instructions for safely cleaning the exterior of the MBL Corona Line unit using appropriate materials.
Specifications for weight, dimensions, power consumption, and digital input types.
Details on digital/analog outputs, CD mechanism, media formats, and DAC specifications.
Specifications for weight, dimensions, connections, and output/input levels.
Further technical details on input/output impedance, signal-to-noise ratio, and distortion.
Specifications for weight, dimensions, connections, and preamplifier section performance.
Specifications for the power amplifier section, including rated power and performance metrics.
Technical specifications for the stereo power amplifier, covering all aspects of performance and connectivity.
Technical specifications for the mono power amplifier, including power ratings and connectivity.
To Next Page
General
