MC2 Audio E45 - Page 11

11
APPENDIX 2
Specification:
E45
Output power (Watts RMS)
per channel
8 ohms @ 1kHz 1200
4 ohms @ 1kHz 2250
2 ohms @ 1kHz 3200
Mono Bridged
8 ohms @ 1kHz 4400
4 ohms @ 1kHz 6400
THD @ rated power
4 ohms 1 kHz <0.009%
20Hz-20 kHz <0.03%
Input CMRR >90dB
Hum & Noise -105dB
Gain (selectable) +32Db/+26dB/+35.7dB
Sensitivity for
rated output, 4 ohms +9.75dBu/+15.75dBu/+6dBu (1.5V)
Damping Factor 1 kHz, 8 ohms >400
Frequency response 20Hz-20kHz - +0/0.5dB
Input impedance (actively balanced) 20k ohms
Dimensions (mm) - 2U 88x482x428
Weight 11kgs
Power requirement 230 VAC @ 20 amps max
115 VAC @ 40 amps max
Table of PRC settings and resulting Output
Output Per Channel (Watts) Bridged Mode (Watts)
Max Power into 4ohm 2250 6400
-2dBu PRC Setting 1400 4000
-4dBu PRC Setting 900 2500
-6dBu PRC Setting 560 1600
Max Power into 8ohm 1200 4400
-2dBu PRC Setting 800 2800
-4dBu PRC Setting 525 1800
-6dBu PRC Setting 350 1200
Max Power into 2ohm 3200 N/A
-2dBu PRC Setting 2000 N/A
-4dBu PRC Setting 1250 N/A
-6dBu PRC Setting 800 N/A