Need help?Do you have a question about the McConnel PA96 and is the answer not in the manual?
Details for dealers to register machines and verify warranty.
Procedure for registering machines to validate warranty.
Details the terms and conditions of limited warranties for machines and parts.
Outlines the process for submitting and handling warranty claims.
Ensures the mower is in safe working condition before operation.
Ensures the tractor is in safe working condition before operation.
Identifies potential significant dangers when operating the machine.
Lists mandatory checks to perform before using the machine.
Outlines conditions and circumstances when the machine must not be used.
Guidance for safe operation in public places and on roadsides.
Importance of using ballast for machine stability.
Steps for initial operation and circulation of oil.
Checks for bolt tightness and torque figures before operation.
Inspection of work area and identification of hazards.
Operator responsibilities for developing safe working procedures.
Urgent safety warning regarding the removal procedure.
Cautionary advice for operating controls during removal.
Identifies and explains the functions of cable control levers.
Details rotor control for electric machines.
Maps controls and functions for the XTC switchbox.
Procedure for changing the rotor's cutting direction.
Explanation of the breakaway system with auto reset.
Explanation of the breakaway system with slew reset.
Specifies correct PTO speeds for optimal machine operation.
Recommendations for the initial 'running in' period of a new machine.
Safe working practices for operating on public roads.
Immediate actions for emergency stopping of machine functions.
Specifies minimum safe heights and clearances for power lines.
Defines absolute minimum exclusion zones around power lines.
Procedures to follow in case of accidents involving electricity.
Highlights critical dangers such as blind side cutting and roller removal.
Table of torque settings for imperial bolts of various grades.
Table of torque settings for metric bolts of various grades.
To Next Page
General