ENGLISH - 9
M. Troubleshooting table
Engine will
Engine runs badly The machine
not start
or looses power runs but does
when cutting not cut well
•
••
••
••
•
•
•
The engine continues to have problems: contact your authorized supplier
Check STOP switch is in the posi-
tion I.
Control fuel level min. 25%tank
capacity.
Check air filter is clean.
Remove spark plug, dry it, clean it
and adjust it, and replace it, if nec-
essary.
Change fuel filter. Contact your deal-
er.
Carefully follow the cutting accesso-
ry assembly instructions.
Check metal cutting accessory is
sharp. Otherwise, contact your deal-
er.
To Next Page
Loading...
