McCulloch MAC MAC 250 L User Manual

115307426 Rev. 4 1/15/11 BRW
INSTRU CTI ON MANUAL
IMPOR TANT INFORMATION
: Please read these instructions carefully and make
sure you understand them before using this unit. Retain these instructions for future
reference.
MANUEL D’INSTRUCTIONS
RENSEIGNEMENTS IMPORTANTS:
Avant d’utiliser cet appareil, veuillez lire
atentivement les instructions et assurez--vous de les avoir comprises. Conservez
les instructions pour référence ultérieure.
BETRIEBSANW EISUNG
WICH TIGE INFORMATI O N:
Lesen Sie diese Hinweise zur Handhabung des
Geräts aufmerksam durch. V erwenden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahren.
MANUAL DE INSTRUCCIONES
INFORMACIÓN IMPORTANTE:
Lea atentamente las instrucciones y
asegúrese de entenderlas antes de utilizar esta aparato. Conserve las instruc-
ciones para la referencia en el futuro.
GB
FR
DE
ES

McCulloch MAC MAC 250 L Specifications

General

Fuel Tank Capacity	0.5 l
Engine Type	2-stroke
Shaft Type	Straight
Handle Type	Loop
Cutting Attachment	Blade
Type	Brush Cutter
Displacement	25.4 cc
Power Type	Gasoline

Summary

Safety Rules

General Safety Precautions

Essential safety warnings and user responsibilities for operating the equipment.

Projectile Danger Zone

Defines the safety zone required due to objects or debris being thrown by the cutting line or blade.

User Safety

Personal Protective Equipment (PPE)

Details required personal protective equipment for safe operation of the unit.

Operating Conduct and Fuel Safety

Guidelines for user conduct, handling hot parts, and fuel safety during operation.

Strap and Balance Adjustment

Shoulder Strap Balance Adjustment

Blade and Transport Cover Mounting

Metal Blade Installation

Detailed steps for safely installing the metal brush blade onto the drive shaft.

Operation - Fueling and Starting

Fueling the Fuel Tank

Guidance on safely filling the fuel tank with the correct fuel-oil mixture.

Starting a Cold Engine

Step-by-step instructions for starting the engine when it is cold or has just been refueled.

Engine Starting and Operation

Restarting a Hot Engine

Starting a Flooded Engine

Operating Position and Safety

Guidance on maintaining a safe and stable operating position for effective cutting.

Using the Cutting Head

Cutting Line and Techniques

Advancing the Cutting Line

Cutting Techniques Explained

Using the Brush Blade

Brush Blade Operation Safety

Blade Kickback Management

Explanation of blade kickback, its causes, and how to maintain control.

Repairs and Adjustments

Cutting Line Replacement Guide

Cutting Line Material Warning

Warning against using metallic wire, rope, or cord as cutting line due to projectile risk.

Carburetor Adjustment

Idle Speed Adjustment

Troubleshooting Guide

Common Problem Diagnosis

A guide to diagnosing and resolving common engine and operational issues.