13
CUTTING HEIGHT CONTROL LEVER
Turn mower off before adjusting cutting height. The single point cut height control adjusts all four wheels
simultaneously. To operate, steady the mower by grasping the handle with one hand, pull the lever out-
wards from the mower with the other hand, and move it to the desired setting.
For heavy or very long grass it is recommended setting the mower cut height to #4 or more to avoid the
possibility of clogging. If clogging becomes persistent because of unfavourable conditions, try walking
slower, cutting a narrower strip or raising the cutting height further.
Fig. 7A
Fig. 7B
To Next Page
Loading...
