To Next PageTo Next PageWhy does my McCulloch PM105 have loss of power?
If your McCulloch Snow Blower is losing power, it could be due to: * A loose spark plug wire. Reconnect the wire. * Throwing too much snow. Reduce your speed and the width of the area you're clearing. * A clogged fuel tank cap vent hole. Remove any ice or snow. * A dirty or clogged muffler. Clean or replace the muffler.
What to do if loss of snow discharge or slowing of snow discharge in McCulloch PM105 Snow Blower?
If your McCulloch Snow Blower's snow discharge is slowing or stopping, several issues could be the cause: * The auger belt might be off the pulley. Check and reinstall it. * The auger belt could be worn. Check and replace it. * The discharge chute might be clogged. Clean the snow chute. * The augers or impeller might be jammed. Remove any debris or foreign objects.
Why McCulloch PM105 engine idles or runs roughly?
If your McCulloch Snow Blower engine idles or runs roughly, consider these possible causes: * The choke might be in the FULL position. Move it to the OFF position. * There might be a blockage in the fuel line. Clean the fuel line. * The fuel might be stale. Drain the tank and refill with fresh, clean fuel. * There might be water in the fuel. Drain the fuel tank and carburetor and refill with fresh gasoline. * The carburetor may need adjustment or overhaul. Contact a qualified service center.
How to fix excessive vibration in McCulloch Snow Blower?
If your McCulloch Snow Blower experiences excessive vibration, it's likely due to loose parts or damaged augers or the impeller. Tighten all fasteners and replace any damaged parts. If the vibration continues, contact a qualified service center.
What to do if loss of traction drive in McCulloch PM105?
If you are experiencing loss of traction drive or slowing of drive speed with your McCulloch Snow Blower, it could be due to: * A worn drive belt. Check and replace the drive belt. * The drive belt being off the pulley. Check and reinstall the drive belt. * A worn friction drive wheel. Contact a qualified service center.
General| Brand | McCulloch |
|---|---|
| Model | PM105 |
| Category | Snow Blower |
| Language | English |
Learn controls and proper use of equipment. Know how to stop the unit quickly.
Inspect area, remove foreign objects, prepare for safe operation before starting.
Guidelines for using the snow thrower safely during operation.
Procedures for maintaining and storing the snow thrower.
Location and purpose of the toolbox for storing parts.
Connects throttle control to the snow thrower.
Procedures for stopping the snow thrower's movement and engine.
Check engine oil level and fill fuel tank before starting.
Procedures for starting the engine with electric starter.
Procedures for starting the engine with recoil starter.
Steps to take before stopping the engine.
Steps to start the engine using the electric starter from cold.
Steps to start the engine using the electric starter when warm.
Steps to start the engine using the recoil starter from cold.
Steps to start the engine using the recoil starter when warm.
Procedures for checking and changing engine oil.
General information about the snow thrower.
How to adjust the snow thrower's height.
Information about the chute deflector and its function.
Procedures for replacing auger and drive wheel shear bolts.
Information on the non-adjustable carburetor and engine speed governor.
Cleaning and preparing the snow thrower for storage.
Critical safety warning regarding storing with gasoline indoors.
Troubleshooting steps for engine not starting.
Troubleshooting steps for loss of engine power.
Troubleshooting steps for rough engine idle.
Troubleshooting steps for excessive vibration.
Troubleshooting steps for a hard-to-pull recoil starter.
Troubleshooting steps for loss of traction or drive speed.
Troubleshooting steps for reduced snow discharge.
Troubleshooting steps for lights not working.
