EasyManua.ls Logo

McCulloch Pro Mac 8000i - Storage; Danger: Storage Precautions

McCulloch Pro Mac 8000i
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DANGER
A
NEVERSTOREYOUR CHIPPER-SHREDDER INDOORS
OR IN AN ENCLOSED, POORLY VENTILATED AREA
IF GASOUNE REMAINS IN THE TANK. FUMES MAY
REACH AN OPEN FiAM~ SPARK OR PILOT UGHT
FROM A FURNACEj WATER HEATER, CLOTHES
DRYER, CIGAREITEj ETC.
TOprevent engine damage ifchipper-shredderis not used for
awe than30 days, follow the steps below.
NOT12GASOLINE MUST BE REMOVED OR TREATED TO
PREVENT GUM DEPOSITS FROM FORMING IN THE TANK,
FILTER, HOSE AND CARBURETOR DURING STORAGE.
AEODURINGSTORAGE, ALCOHOL-BLENDED GASOLINE
THAT USES ETHANOL OR METHANOL (SOMETIMES
CALLEDGASOHOL) ATIRACTS WATER. IT ACTS ON THE
GASOLINE TO FORM ACIDS WHICH DAMAGE THE EN-
GINE.
To remove gasoline,run engine “untiltankisemptyandengine w
stops. if you do not want to remove gwdine,agasstabilizer
such as STA-BIL may be added to any gasoline left in the tank
to minimize gum deposits and ac”ds. Ifthetankis almost empty,
mixstabifiierwith fresh gasoline in aseparatecontainerand add
some to the tank.
Alwaysfollow instructionson stsibiiizer
container.Thenrun
engine at feast 10 minutes after etabf-
Iizer is added to allow mixture to reach carburetor. Store
chipper-shredder in safe piace. See warning above.
Thefollowing steps should beteken to prepare yourshredderfor
storage.
. Clean unit thorougitly, including engine.
Refer to engine manual for correct engine storage
instruct”mns.
Carefully inspect unit and repiace any worn, damaged, or
missing parts and tghten any ioose fasteners
if storing in an unventilated or metal storage shed, coat
metal parts with a ~ght oil or sifiine to prevent rusting.
Store Chipper/Shredder in a dry, clean are% out of the
reach of children.
. .
..
.—.
—.— .— —-—.
10
:’:
‘. :,”
~~
!
2,6:
.,

Related product manuals