Need help?Do you have a question about the MCD Racing XS5 Competition and is the answer not in the manual?
Details warranty coverage, exclusions, and claim procedures for MCD racing cars.
Outlines essential safety measures for handling gasoline and operating the engine.
Lists critical pre-operation checks for the car's components and safety.
Provides essential 'do' and 'don't' actions for safe and proper operation of the RC car.
Lists all necessary equipment and tools required for operating the RC car.
Step-by-step instructions for installing the optional air flow set on the engine.
Instructions on how to install the servo heat plate to protect servos from engine heat.
Important warnings and instructions regarding the air filter's use and maintenance.
Detailed guide on how to properly mount the engine onto the car chassis.
Explains how to set the gear mesh selection plate for different gear ratios.
Step-by-step guide for correctly installing and adjusting the throttle linkage.
Detailed instructions for assembling and adjusting the brake linkages for optimal performance.
Guidance on installing a rear brake servo, requiring programmable radio mixing.
Instructions for installing and setting up a single servo for steering control.
Critical steps for installing and synchronizing two servos for steering.
Instructions on preparing the correct fuel mixture for the engine.
Procedure for safely shutting down the engine using the stop switch.
Guidance on setting the carburetor to default specifications for proper engine function.
How to adjust the low-speed (idle) mixture needle for optimal engine performance.
Adjusting the high-speed (WOT) mixture needle for full throttle performance.
Essential steps for breaking in the engine to ensure longevity and performance.
Instructions on how to set the toe-in and toe-out angles for steering geometry.
General guide for cutting out the RR5 car's body shell.
Specific tips and techniques for accurately cutting the RR5 body shell.
Guide for cutting out the XS-5 model's body shell.
Specific tips for accurately cutting the XS-5 body shell.
Recommendations for maintaining the drive train, including chain lube and grease.
Details of the complete RR5 body shell kit components.
Instructions for mounting the side body holders on the RR5 model.
Information about the decal set for the RR5 model.
Details of the complete XS-5 body shell kit components.
Instructions for mounting the side body holders on the XS-5 model.
Information about the decal set for the XS-5 model.
Visual guide showing the application of decals on the RR5 model.
Visual guide showing the application of decals on the XS-5 model.
Image showing the chassis configuration for the RR5 FT model.
Image showing the chassis configuration for the RR5 Competition model.
Image showing the chassis configuration for the XS-5 FT model.
Image showing the chassis configuration for the XS-5 Competition model.
Default settings for front, center, and rear differentials on FT models.
Default settings for front, center, and rear differentials on Competition models.
Default settings for front and rear shock springs.
Default oil viscosity settings for front and rear shock absorbers.
Default piston hole sizes for front shock absorbers.
Default thickness settings for front and rear anti-roll bars on FT models.
Table showing default transmission ratios and related settings.
Default settings for front, center, and rear differentials.
Default settings for front and rear shock springs.
Default tyre compound settings.
Default oil viscosity settings for front shock absorbers.
Default piston hole sizes for front shock absorbers.
Default thickness settings for front and rear anti-roll bars.
Table showing default transmission ratios and related settings.
Exploded view diagram of the MCD XS5 Factory Team model parts.
Exploded view diagram of the MCD XS5 Competition model parts.
Exploded view diagram of the MCD RR5 Competition model parts.
General| Brand | MCD Racing |
|---|---|
| Model | XS5 Competition |
| Category | Toy |
| Language | English |
To Next Page