McDATA 316095-B21 - StorageWorks Edge Switch 2/24 - Page 320

B
B-72
E/OS SNMP Support Manual
FC Management MIB
rowInactive
READ: Indicates that this row does exist, but that traps are not
enabled to be sent to the target.
WRITE: If the row does not exist, and the agent allows writes to the
trap table, then a new row is created. The values of the optional
columns will be set to default values. Traps are not enabled to be sent
to the target. If the row already existed, then traps are disabled from
being sent to the target.
rowActive
READ: Indicates that this row exists, and that traps are enabled to be
sent to the target.
WRITE: If the row does not exist, and the agent allows writes to the
trap table, then a new row is created. The values of the optional
columns will be set to default values. Traps are enabled to be sent to
the target. If the row already exists, then traps are enabled to be sent
to the target.
A value of rowActive or rowInactive must be specified to create a
row in the table.
Sequence
::= { trapRegEntry 4}