2
MIB Definitions: MIB-II
2-23
McDATA SNMP Support
Interfaces Table The interfaces table contains information on the entity's interfaces.
Each interface is thought of as being attached to a “subnetwork”.
Note that this term should not be confused with “subnet” which
refers to an addressing partitioning scheme used in the Internet suite
of protocols.
ifIndex
Type INTEGER
Access R
Description A unique value for each interface. Its value ranges between 1 and the
value of ifNumber. The value for each interface must remain constant
at least from one re-initialization of the entity's network management
system to the next re-initialization.
ifDescr
Type DisplayString(0..255)
Access R
Description A textual string containing information about the interface. This
string should include the name of the manufacturer, the product
name and the version of the hardware interface.
ifType
Type INTEGER
Access R
Description The type of interface, distinguished according to the physical/link
protocol(s) immediately below the network layer in the protocol
stack.
Values:
other(1), none of the following
regular1822(2),
hdh1822(3),
ddn-x25(4),
rfc877-x25(5),
To Next Page
Loading...