Step 4 - Setting the cutting height
• Verify that the lawn is free of stones, sticks, wires, and other objects that could damage
the hover mower.
• When cutting thick grass, reduce walking speed in order to maintain a high blade speed
for a more effective cut and better hover lift.
• Never cut off more than half of the total length of the grass for a healthy lawn. If it is
roughly 6cm long, the grass should not be shorter than 3cm once mowed.
• Do not cut wet grass because it tends to stick to the underbody of the hover mower,
preventing the proper discharge of grass clippings.
Prepare
• Remove the blade bolt by spanner provided, add a spacer between the blade and the
impeller to reduce the cutting height 7mm.
Cutting position Cutting height
1 (Non-spacer) 33mm
2 (1 spacer, pre-assemble) 26mm
3 (2 Spacers) 19mm
4 (3 spacers) 12mm
Step 3 - Mowing tips
33 mm
12 mm
19 mm
26 mm
To Next Page
