Customer Helpline 0345 605 2062
12
Step 4 - Assemble inlet adapter.
Warning: Use a water lter if the inlet water is contained.
Attach the inlet adapter to the machine’s water inlet. Hand tighten only.
Step 5 - Connect garden hose and water supply.
Attach garden hose to water supply and turn water on.
Step 6 - Connect garden hose and inlet adapter.
Before you attach your water hose (not included), run the water through to eliminate any air in
the hose to avoid air locking. Attach the hose with a quick connect coupling (not included) to
the high pressure washer.
Prepare
To Next Page
Loading...
