McIntosh C38 - Installation Diagram

C38 CUSTOM MOUNTING
17.1/2"
444mm
-BOTTOM OF CUTOUT AND TOP
OF SUPPORT SHELF MUST
COINCIDE
6 X 1/2
WOOD SCREW
AND WASHER
18
INSTALLATION
DIAGRAM
SUPPORT SHELF
6-32 X 3/8
MACHINE SCREW
AND WASHER
(SIDE VIEW)
MOUNTING BRACKET
AT BOTH SIDES OF
REAR PANEL
OUTLINE OF UNIT
ALLOW A TOTAL OF 17" (43.2cm)
FOR ADEQUATE CLEARANCE OF THE
VARIOUS CONNECTORS THAT MAY BE USED
MOUNTING SURFACE
END CAPS
ARE
5.3/8"
136.9mm
4.7/8"
123.8mm
PANEL
HEIGHT
IS
5.5/16"
134.9mm
EDGE OF CUTOUT
17 "
433. 4mm
SUPPORT SHELF
OUTLINE OF FRONT PANEL