To Next PageTo Next Page
Need help?Do you have a question about the McIntosh HT-3 and is the answer not in the manual?
General| Brand | McIntosh |
|---|---|
| Model | HT-3 |
| Category | Speaker System |
| Language | English |
Record serial number, purchase date, and dealer name for future reference.
Details required wire gauge (AWG) for loudspeaker cables based on length.
Advises consulting connected component manuals for connection details.
Describes the HT-3 as a two-way surround loudspeaker for home theater and music.
Details the 5-inch low frequency and 1-inch dome high frequency drivers.
Explains the antiphase crossover at 350Hz for diffused surround effect.
Highlights efficient driver design suitable for various amplifier wattages.
Discusses discreet design with removable grilles for custom matching.
Explains the sealed enclosure for superior sound and reduced room bleed.
Notes gold plated connectors for corrosion resistance and conductivity.
Confirms the HT-3 meets THX standards for movie theater sound reproduction.
Provides dimensions for the HT-3 Surface Mount speaker without its grille.
Provides dimensions for the HT-3 Surface Mount speaker with its grille attached.
Provides dimensions for the HT-3 Flush Mount speaker without its trim frame and grille.
Provides dimensions for the HT-3 Flush Mount speaker with trim frame and grille.
Explains the HT-3's dipolar radiation for a diffuse sound field and nulls.
Discusses adjusting speaker placement for more directional surround effects.
Step-by-step guide for mounting the HT-3 using the surface mount method.
Detailed instructions for installing the HT-3 into a wall cutout.
Instructions for preparing bare wire or spade lug speaker cables.
Guide for connecting speaker cables between amplifier and HT-3 binding posts.
Details the number and type of drivers used in the HT-3 system.
Lists the nominal impedance and frequency response range of the speakers.
Specifies the speaker sensitivity and the crossover frequency.
Indicates the maximum power handling capacity of the HT-3 speakers.
Provides detailed measurements for surface and flush mount configurations.
Describes the speaker finish and its net and shipping weight.
Guidelines for safely repacking the equipment using original materials.
Lists part numbers for shipping carton, foam caps, and air cap.
