Need help?Do you have a question about the McIntosh MCT500 and is the answer not in the manual?
General| Signal-to-Noise Ratio | 110 dB |
|---|---|
| Digital Outputs | 1 x Coaxial, 1 x Optical |
| Frequency Response | 4 Hz to 20, 000 Hz |
| Disc Formats | CD, CD-R, CD-RW |
| Digital Output Sample Rate | 44.1kHz (CD), 2.8224MHz (SACD via MCT) |
| Total Harmonic Distortion | <0.002% |
Provides contact information for product support, service, and troubleshooting assistance.
Describes the push-buttons, USB connector, and information display on the front panel.
Lists and explains remote control buttons for various playback modes.
Details supported disc formats, including SACD, CD, and data discs.
Details pin configurations for digital audio XLR connectors and cable requirements.
Highlights advanced features like twin laser pickup, advanced transport, and digital outputs.
Details product dimensions and provides instructions for installation and ventilation.
Illustrates and describes the various input and output connectors on the rear panel.
Instructions for connecting power, data, sensor, and digital audio to analog systems.
Instructions for connecting power, data, sensor, and digital audio to digital systems.
Details the functions of front panel displays, controls, and push-buttons.
Explains how to use the remote control for CD, SACD, Data, and USB playback.
Step-by-step guide for playing SACD, CD, Data discs, and USB drives.
Details technical specifications, power requirements, and dimensions.
Provides guidelines for safely repacking the unit for shipment.
To Next Page
